Volume-8 Issue-2S5, July 2019 – International Journal of Recent Technology and Engineering (IJRTE)

B10530682S519

IJRTE Journal — Thu, 25 May 2023 12:04:20 +0000

Scheduling to Maximize the Data Transfer Rate for Big Data Applications in Cloud System
D. Sugumaran¹, C. R. Bharathi²
¹D. Sugumaran, Department of Information Technology, Vel Tech Rangarajan Dr. Sagunthala R&d Institute of Science and Technology, Chennai (Tamil Nadu), India.
²Dr. C. R. Bharathi, Department of ECE, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Avadi, Chennai (Tamil Nadu), India.
Manuscript received on 16 July 2019 | Revised Manuscript received on 12 August 2019 | Manuscript Published on 29 August 2019 | PP: 255-258 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10530682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1053.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In cloud platform, parallel computing is precisely one of the methods to handle various computational tasks which need to perform fast on a large dataset. In a system each job was run by the respective processors. Jobs may need to be accompanying through nodes and it will share resources. So scheduling is important to share the resources and path diversity is very much of important in order to get the data within least retrieval time. The existing scheduling algorithms should not efficiently find the optimum solution. In this paper we make a survey to provide the better transfer scheduling algorithm for transfer the data within stipulated time, to maximize the data transfer rate and to choose cost effective paths.
Keywords: Data Center Networks, Parallel Computing, Maximizing Data Transfer, Cloud System.
Scope of the Article: Big Data Quality Validation

Download PDF

The post B10530682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).

B10520682S519

IJRTE Journal — Thu, 25 May 2023 11:56:39 +0000

A Metaheuristic Algorithm for VLSI Floorplanning Problem
S. Venkatraman¹, M. Sundhararajan²
¹S. Venkatraman, Research Scholar, Department of Electronics and Communication Engineering, Bharath institute of Higher Education and Research, Chennai (Tamil Nadu), India.
²Dr. M. Sundhararajan, Dean Research, Department of Electronics and Communication Engineering, Bharath institute of Higher Education and Research, Chennai (Tamil Nadu), India.
Manuscript received on 16 July 2019 | Revised Manuscript received on 12 August 2019 | Manuscript Published on 29 August 2019 | PP: 249-254 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10520682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1052.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Floorplanning plays an important role within the physical design method of very large Scale Integrated (VLSI) chips. It’s a necessary design step to estimate the chip area before the optimized placement of digital blocks and their interconnections. Since VLSI floorplanning is an NP-hard problem, several improvement techniques were adopted to find optimal solution. In this paper, a hybrid algorithm which is genetic algorithm combined with music-inspired Harmony Search (HS) algorithm is employed for the fixed die outline constrained floorplanning, with the ultimate aim of reducing the full chip area. Initially, B*-tree is employed to come up with the first floorplan for the given rectangular hard modules and so Harmony Search algorithm is applied in any stages in genetic algorithm to get an optimum solution for the economical floorplan. The experimental results of the HGA algorithm are obtained for the MCNC benchmark circuits.
Keywords: Genetic Algorithm (GA), Harmony Search Algorithm (HAS), Hybrid Genetic Algorithm (HGA), Slicing Floorplan.
Scope of the Article: Computer Architecture and VLSI

Download PDF

The post B10520682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).

B10510682S519

IJRTE Journal — Thu, 25 May 2023 11:50:33 +0000

Implementation of Virtual Reality in Serious Gaming – War Simulation
S. Ramachandran¹, Rabiyathul Basariya²
¹S. Ramachandran, Research Scholar, Bharath Institute of Higher Education and Research, Chennai (Tamil Nadu), India.
²S. Rabiyathul Basariya, Research Supervisor, Associate Professor, Department of Commerce & Business Administration, Bharath Institute of Higher Education and Research, Chennai (Tamil Nadu), India.
Manuscript received on 16 July 2019 | Revised Manuscript received on 12 August 2019 | Manuscript Published on 29 August 2019 | PP: 245-248 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10510682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1051.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In this work, the researcher presents War Simulation through virtual reality. Through the work, the researcher tries to create a tactical war kind off a simulation that will not only be beneficial to train the military personnel but also combine with the Virtual Reality in order to give an experience that will help the Indian personnel to be trained in a better way. The researcher takes into account the simulation process that is being used throughout the world and follows the steps of various already constructed simulations with added advantages and upgrades. This work shall discuss the technical aspects of the construction of the simulation while also taking into account the amount that will be used in building the simulation. By combining the elements of a serious game and combine them with Virtual reality, the simulation provides a very immersive experience that will be used to help the soldiers in a more virtual way. While starting to create the simulation the researcher takes into account the various necessities that will be used to create the simulation. There will be different multiplayer aspects that will be used in this simulation. A detailed explanation will be provided for various topics.
Keywords: Virtual Reality (VR), Photon Unity Network (PUN), Remote Procedure Calls (RPCs).
Scope of the Article: Virtual Reality

Download PDF

The post B10510682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).

B10500682S519

IJRTE Journal — Thu, 25 May 2023 11:43:03 +0000

Attention Deficit Hyperactivity Disorder (Adhd) Detection Methods
M. Sheriff¹, R. Gayathri²
¹M. Sheriff, Assistant Professor, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
²R. Gayathri, Research Supervisor, Associate Professor, Department of Electronics and Communication Engineering, Sri Venkateswara College of Engineering, Chennai (Tamil Nadu), India.
Manuscript received on 16 July 2019 | Revised Manuscript received on 12 August 2019 | Manuscript Published on 29 August 2019 | PP: 242-244 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10500682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1050.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Attention Deficit Hyperactivity Disorder (ADHD) is one of the most common mental-health disorders, affecting around 5%-10% of school-age children. This paper details about various methodologies for detecting and diagnosing the ADHD disease in patients using different soft computing and deep learning techniques. The limitations of advantages of each ADHD method were discussed in detail with its corresponding simulation results. The feature extraction method and its training with classification procedure for each conventional ADHD method were illustrated in detail.
Keywords: ADHD, Disorder, Features, Classifications, Diagnosing.
Scope of the Article: Probabilistic Models and Methods

Download PDF

The post B10500682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).

B10490682S519

IJRTE Journal — Thu, 25 May 2023 11:35:06 +0000

Lifi Based Audio Communication for Coal Mine Parameter Monitoring and Automatic Control System
P. Kalyana Sundaram¹, M. Anto Bennet², Giridhar Reddy³
¹Dr. P. Kalyana Sundaram, Department of ECE, Saveetha School of Engineering, Chennai (Tamil Nadu), India.
²Dr. M. Anto Bennet, Department of ECE, Vel Tech, Chennai (Tamil Nadu), India.
³Giridhar Reddy, Department of ECE, Vel Tech, Chennai (Tamil Nadu), India.
Manuscript received on 16 July 2019 | Revised Manuscript received on 12 August 2019 | Manuscript Published on 29 August 2019 | PP: 238-241 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10490682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1049.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Li-Fi (Light Fidelity) is a quick and shoddy optical rendition of correspondence. The principle segments of this correspondence framework are a high power white LED which goes about as a correspondence source and a silicon Photo diode which demonstrates great reaction to noticeable wavelength locale filling in as the getting component. An essential factor while planning Li-Fi is Line of Sight (LoS). The LED can be turned on and off to create advanced series of 0s. Information is coded in the light which changes into new information by shifting the glinting rate of the LED. Since the speed of the light is exceptionally quick, the transmitted yield is gotten as voice signs to the specialists at the coal mineshaft. Coal mining and oring includes the disclosure of coal and its troublesome works of extraction, notwithstanding its evacuation and deal in the generation of concrete industry. Most wounds occurring in the underground mines incorporates the falling of rocks, slips and blasts. Harmful gas is produced amid the season of mining and oring forms. The mining laborers are influenced by lung illness by breathing in residue and lethal gas in Coal mining condition. This data is implied to the specialists at the coal mineshaft from the higher authorities through Li-Fi as a voice motions in this work.
Keywords: Li-Fi (Light Fidelity), Line of Sight (LoS), Optical Wireless Communications (OWC), Visible Light Communications (VLC).
Scope of the Article: Wireless Communications

Download PDF

The post B10490682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).

B10480682S519

IJRTE Journal — Thu, 25 May 2023 11:22:19 +0000

Path Delay Optimized Booth Radix-8 Architecture
T. R. Dinesh Kumar¹, M. Anto Bennet², J. Kishan³, Kishore P⁴, Sanjeet Kumar⁵, Vidhur B Praman S⁶
¹T. R. Dinesh Kumar, Professor, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
²Dr. M. Anto Bennet, Professor, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
³J. Kishan, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
⁴Kishore P, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
⁵Sanjeet Kumar, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
⁶Vidhur B Praman, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
Manuscript received on 16 July 2019 | Revised Manuscript received on 12 August 2019 | Manuscript Published on 29 August 2019 | PP: 235-237 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10480682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1048.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In this paper, a quick and low power marked MAC Unit is proposed with reconfigurable Modified stall calculation (MBE). The proposed engineering depends on adjusted corner radix-8 with consolidated 2’s supplement and MUX units with a low basic way postponement and low equipment multifaceted nature. Here corner-based methodology for incomplete items ages and Tree based methodology for halfway items decrease in increases. The new decreases design the equipment intricacy of the summation arrange utilizing consolidated swell convey viper and convey look forward (CLA), along these lines lessens the general power and multifaceted nature. Expanding the speed of activity can be broadened utilizing marked corner radix-8 based MAC unit with noteworthy execution enhancement. We can stall augmentation into two sections, incomplete item age and halfway item amassing. Accelerating augmentation, hence, must point (I) accelerating fractional item age, (ii) decreasing the quantity of incomplete items, (iii) accelerating halfway item summation or (iv) a combination of the above.
Keywords: Marketing, Segmentation, Technology and Buying Behaviour.
Scope of the Article: Service Oriented Architectures

Download PDF

The post B10480682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).

B10470682S519

IJRTE Journal — Thu, 25 May 2023 11:11:54 +0000

IoT Based Physical Condition Screening System For Animals
S. Kalaivani¹, R. Anitha², S. Anusooya³, Jean Shilpa⁴, S. Ramachandran⁵
¹S. Kalaivani, Department of Electronics and Communication Engineering, BSA Crescent Institute of Science & Technology, Chennai (Tamil Nadu), India.
²R. Anitha, Department of Electronics and Communication Engineering, BSA Crescent Institute of Science & Technology, Chennai (Tamil Nadu), India.
³S. Anusooya, Department of Electronics and Communication Engineering, BSA Crescent Institute of Science & Technology, Chennai (Tamil Nadu), India.
⁴Jean Shilpa, Department of Electronics and Communication Engineering, BSA Crescent Institute of Science & Technology, Chennai (Tamil Nadu), India.
⁵S. Ramachandran, Department of Electronics and Communication Engineering, BSA Crescent Institute of Science & Technology, Chennai (Tamil Nadu), India.
Manuscript received on 16 July 2019 | Revised Manuscript received on 12 August 2019 | Manuscript Published on 29 August 2019 | PP: 231-234 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10470682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1047.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Animal husbandry and its health monitoring is one of the prime facts for the socio-economic development of a nation. This necessitates monitoring the wellbeing of the animals and thereby increasing the food supply of the country. Advancement in wearable biosensors and wireless communication technologies help in ubiquitous E-health monitoring of animals. The proposed system is build up of recent technologies to screen the physical condition of the animals continuously from anywhere and at anytime. The vital parameters like body temperature, heart rate and position tracking are acquired using respective sensors. The collected data are transmitted wirelessly over internet and are stored in a database using IoT technology. The system also alerts the farmers/care takers at the critical conditions. The records that reflect the physical condition of animals collected in the database helps veterinary doctors to provide effective treatment.
Keywords: IoT; Arduino; Animal Health Monitoring; Sensors.
Scope of the Article: IoT

Download PDF

The post B10470682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).

B10460682S519

IJRTE Journal — Thu, 25 May 2023 11:00:12 +0000

Design of 13T SRAM Bitcell in 22nm Technology using FinFET for Space Applications
T. R. Dinesh Kumar¹, M. Anto Bennet², R. Aishwarya³, S. Elamathy⁴, M. Kowsalya⁵, C. Ranti Bownisha⁶
¹T. R. Dinesh Kumar, Assistant Professor, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
²Dr. M. Anto Bennet, Professor, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
³R. Aishwarya, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
⁴S. Elamathy, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
⁵M. Kowsalya, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
⁶C. Ranti Bownisha, Department of Electronics and Communication Engineering, Vel Tech, Chennai (Tamil Nadu), India.
Manuscript received on 15 July 2019 | Revised Manuscript received on 11 August 2019 | Manuscript Published on 29 August 2019 | PP: 226-230 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10460682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1046.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Majority of youngsters’ having connected online through internet either through computers or by smart phones. After the entry of Jio in the field of internet, the competition began and the cost of internet service became much cheaper andnoweveryone SRAM can be found in the cache memory which is a part of the RAM digital to analog converter. SRAM is used for high speed register and some of the small memory banks. The risk of these circuits and memory arrays which are capable to radiation effects than circuits powered at minimal supply voltages. when an high energy particle hits a sensitive node in a circuit soft errors like Single Event Upsets(SEUs)occurs. The attainment of radiation hardening of memory blocks is executing large bit cells or single Error Correcting Codes(ECCs). But ECC may require notable area, performance and leakage power penalties. The favorable device characteristic of FinFET avails them as a popular contender for the replacement of CMOS technologies. An optimal approach to reduce the leakage power of a 13T SRAM cell based on 22nm FinFET technology is proposed in this work . The circuit contains a dual- driven separated feedback mechanism to tolerate the upset with charge of deposits . Better immunity is supplied by this cell to soft errors when compared to 6T SRAM cell.
Keywords: Radiation Hardening, Low Voltage, Critical Charge, Single Event Upset(SEU), FinFET, Static Random Access Memory(SRAM), Memory Array, Soft Errors, Ultra Low Power (ULP).
Scope of the Article: Design and Diagnosis

Download PDF

The post B10460682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).

B10450682S519

IJRTE Journal — Thu, 25 May 2023 10:49:13 +0000

Dynamic Fingerprint Pattern Lock Mobile Application Using Android
K. Ramesh¹, M. Anto Bennet², S.Prasanth³, M A. Anand⁴, V. Sujith Kumar⁵, R.Ragavendran⁶, M. Thirumana Sambantham⁷
¹K. Ramesh, Department of CSE, Hindustan Institute of Technology and Science, Chennai (Tamil Nadu), India.
²M. Anto Bennet, Department of ECE, Vel Tech, Chennai (Tamil Nadu), India.
³S. Prasanth, Department of ECE, Vel Tech, Chennai (Tamil Nadu), India.
⁴M A. Anand, Department of ECE, Vel Tech, Chennai (Tamil Nadu), India.
⁵V. Sujith Kumar, Department of ECE, Vel Tech, Chennai (Tamil Nadu), India.
⁶R. Ragavendran, Department of ECE, Vel Tech, Chennai (Tamil Nadu), India.
⁷M.Thirumana Sambantham, Department of ECE, Vel Tech, Chennai (Tamil Nadu), India.
Manuscript received on 15 July 2019 | Revised Manuscript received on 11 August 2019 | Manuscript Published on 29 August 2019 | PP: 222-225 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10450682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1045.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: In this paper we are examining about information security in mobile. Numerous cell phone creators currently fuse biometric security highlights into their products. Furthermore, some gadget makers presently enable application designers to utilize these highlights through their product advancement packs (SDKs). In this investigation, we use fingerprint recognition with a pattern, to build up a security for mobile application. Before, application had the single time finger press. Here we have utilized various time check and long-term hold confirmation techniques. Inside a constrained time, outline, the unique fingerprint image can be utilized to open the app which has classified information identified with government, banking, training, and so on which must be verified. As the generation of cell phones with fingerprint recognition keeps on expanding, this type of authentication system, the one we present in this paper, will turn into a great safety measure.
Keywords: Marketing, Segmentation, Technology and Buying Behaviour.
Scope of the Article: Pattern Recognition

Download PDF

The post B10450682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).

B10440682S519

IJRTE Journal — Thu, 25 May 2023 10:36:17 +0000

Automatic Detection and Classification Techniques of Acute Myelogenous Leukemia (AML) Using SVM and Generic Algorithm
V. Nehru¹, N. D. Bobby², K. S. Rani³, Giridhar Reddy⁴, M. Anto Bennet S.⁵
¹V. Nehru, Assistant Professor, Department of CSE, Vel Tech, Chennai (Tamil Nadu), India.
²Dr. N. D. Bobby, Professor, Department of ECE, Vel Tech High Tech Dr. Rangarajan Dr. Sakunthala Engineering College, Chennai (Tamil Nadu), India.
³K.S.Rani, Assistant Professor, Department of EEE, Vel Tech High Tech Dr. Rangarajan Dr. Sakunthala Engineering College, Chennai (Tamil Nadu), India.
⁴Giridhar Reddy, Professor, Department of ECE,Vel Tech, Chennai (Tamil Nadu), India.
⁵Dr. M. Anto Bennet, Professor, Department of ECE,Vel Tech, Chennai (Tamil Nadu), India.
Manuscript received on 15 July 2019 | Revised Manuscript received on 11 August 2019 | Manuscript Published on 29 August 2019 | PP: 216-221 | Volume-8 Issue-2S5 July 2019 | Retrieval Number: B10440682S519/2019©BEIESP | DOI: 10.35940/ijrte.B1044.0782S519
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Majority of youngsters’ having connected online through internet either through computers or by smart phones. After the entry of Jio in the field of internet, the competition began and the cost of internet service became much cheaper andnoweveryone can afford the cost. Latest “Times of India” statistics shows around 59% of internet users are college students/young men. The trend of going to the physical stores to buy the product is in the decline stage where as the trend of surfing product specification as well as its cost and alternates through online marketing sites is increasing among youngsters. Since, it is more convenient for them to shop anywhere and anytime. Shopping can be done 24 x 7 and before buying; review of product performance through social media and compare its price through varies alternate sites. There is no compulsion to buy the product while surfingoreven if visited the siteforany number of times. The payment can be made through online transition and products will be delivered to doorstep.Hence shopping through online become a joyful experience and preferred by youngsters.
Keywords: Marketing, Segmentation, Technology and Buying Behaviour.
Scope of the Article: Classification

Department of

The post B10440682S519 appeared first on International Journal of Recent Technology and Engineering (IJRTE).