Mathematical Modelling and Implementation of Solar Based Water Pumping System for Irrigation
Kunal Kenge1, Mohit Hasija2, Ruchika Tare3, Santosh S. Raghuwanshi4
1Kunal Kenge, Department of Electrical Engineering, Medi-Caps University, Indore, India.
2Mohit Hasija, Department of Electrical Engineering, Medi-Caps University, Indore, India.
3Ruchika Tare, Department of Electrical Engineering, Medi-Caps University, Indore, India.
4Santosh S Raghuwanshi, Asst. Prof., Department of Electrical Engineering, Medi-Caps University, Indore, India.
Manuscript received on January 02, 2020. | Revised Manuscript received on January 15, 2020. | Manuscript published on January 30, 2020. | PP: 5625-5633 | Volume-8 Issue-5, January 2020. | Retrieval Number: E6706018520/2020©BEIESP | DOI: 10.35940/ijrte.E6706.018520
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper presents mathematical design of solar based irrigation system for water pumping employing MATLAB/Simulink environment. Perturb and observe (P&O) technique, which is an algorithm, is used for obtaining maximum amount of power from the output. The Perturb and Observe MPPT technique is realized on a cuk converter. The performance of PV system is tested at various solar irradiance and temperature of cell. The results confirmed that motor-pump speed, current and power increases on increasing solar insolation. This paper and piece of research will aid system designers in analyzing the performance of the system at various atmospheric condition in rural irrigation.
Keywords: PV generator, Cuk converter, inverter, motor-pump, P&O algorithm
Scope of the Article: Renewable Energy Technology