Differential CMOS Low Noise Amplifier Design for Wireless Receivers
Mahesh Mudavath1, K Hari Kishore2, Srinivas Bhukya3, Babu Gundlapally4, Prashanth Chittireddy5
1Mahesh Mudavath, Department of Electronics and Communication Engineering from JNTU Hyderabad, India.
2K. Hari Kishor, Professor, Department of Electronics and Communication Engineering from JNTU Hyderabad, India.
3Srinivas Bhukya, Asst. Professor, Department of Electronics and Communication Engineering from JNTU Hyderabad, India.
4Babu Gundlapally, Department of Electronics and Communication Engineering from JNTU Hyderabad, India.
5Prashanth Chittireddy, Asst. Professor, Department of Electronics and Communication Engineering from JNTU Hyderabad, India.

Manuscript received on November 15, 2019. | Revised Manuscript received on November 23, 2019. | Manuscript published on November 30, 2019. | PP: 2367-2374 | Volume-8 Issue-4, November 2019. | Retrieval Number: D6930118419/2019©BEIESP | DOI: 10.35940/ijrte.D6930.118419

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: This article presents the differential CMOS-LNA design for wireless receiver at the frequency of 3.4GHz. This differential 𝑳𝑵𝑨 provides less noise figure (NF), high gain and good reverse isolation as well as good stability. The designed LNA is simulated with a 180 nanometers CMOS process in cadence virtuoso tool and simulate the results by using SpectreRF simulator. This LNA exhibits a NF of 0.7dB, a high voltage gain of 28dB, and good reverse isolation (S12) of -70dB. It produces an input and output reflection coefficient (S11) of -6.5dB and (S22) of -14dB, and it maintains good stability of Rollet factor Kf > 1, and also alternate stability factor B1f < 1, respectively.
Keywords: Differential; Low Noise Amplifier; Wireless Receivers; Noise Figure..
Scope of the Article: Wireless Multimedia Systems.