Pitch Angle Control through PI and PID Controller based for Wind Energy Conversion System
Mukesh Kumar Rathore1, Meena Agrawal2

1Mukesh Kumar Rathore*, Energy Centre, Maulana Azad National Institute of Technology, Bhopal, (M.P.), India.
2Meena Agrawal, Energy Centre, Maulana Azad National Institute of Technology, Bhopal.

Manuscript received on April 02, 2020. | Revised Manuscript received on April 10, 2020. | Manuscript published on May 30, 2020. | PP: 318-322 | Volume-9 Issue-1, May 2020. | Retrieval Number: F9995038620/2020©BEIESP | DOI: 10.35940/ijrte.F9995.059120
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The worldwide electrical energy consumption is growing day by day and also increasing the demand of power generation. So in addition into the electrical power system network for power production units a large number of renewable energy units is being combined. A wind energy generation system is the economical of all safe renewable energy sources and the environmentally clean in worldwide. The acceptance of variable speed generation systems the recent evolution of variable frequency drive and power semiconductors technology has been aided. Pitch angle control techniques is best factor to improve the efficiency as well as protection of the wind turbine blade. Therefore, presented in the work a comprehensive model of permanent magnet machines in wind turbine system. Modelling and simulation permanent magnet machines with wind turbine system of PI and PID controller based pitch angle control figuring performance is done by using MATLAB software. The significant result of these controller performance is being compared and also shown with validate approach with the existing survey. 
Keywords: MATLAB, pitch angle, PMSM, PI and PID controller.
Scope of the Article: Renewable Energy Technology