Connotation of Workout Variables with Surface Unevenness Throughout CNC Turning of ASTM 316 Steel Exhausting RSM
Shweta Siktta Swain1, N. K. Kund2
1Shweta Siktta Swain, Department of Production Engineering, Veer Surendra Sai University of Technology, Burla, Sambalpur, Odisha, India.
2N. K. Kund*, Department of Production Engineering, Veer Surendra Sai University of Technology, Burla, Sambalpur, Odisha, India.
Manuscript received on November 12, 2019. | Revised Manuscript received on November 25, 2019. | Manuscript published on 30 November, 2019. | PP: 4553-4557 | Volume-8 Issue-4, November 2019. | Retrieval Number: D8479118419/2019©BEIESP | DOI: 10.35940/ijrte.D8479.118419
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Series of explorations vis-à-vis RSM stays developed and executed for estimating outcome of several workout variables like V, F and D on surface unevenness throughout CNC turning of ASTM 316 steel using coated carbide insert. 2D graphs through momentous surface unevenness got developed and utilized for evaluating average surface unevenness through ideal design situations. Evidently, text interface impressions are extraneous. Research findings through different mathematical analyses provided the effective guideline for choosing appropriate machine settings to realize surface unevenness within the stipulated limit during stated turning operation. Ideal machining situations got determined to minimize the surface unevenness of same. Current research evidently divulges that multicoated carbide inserts performed marvelously at optimum workout variables combination of V = 150 m/min, F = 0.10 mm/rev with D = 0.4 mm. Ultimate range of Ra with Rz are 0.16 μm ≤ Ra ≤ 0.52 μm and 1.4 μm ≤ Rz ≤ 3.1 μm, respectively. Besides, Ra is below recommended safety limit 1.5 μm (i.e. Ra < 1.5 μm) for turning using coated carbide inserts. 2D contour plots got developed with changing 2 variables and unchanging third one. Exclusively, both unevenness variables (Ra and Rz) increase with F. Nevertheless, D got quite insignificant impact on both unevenness variables (Ra and Rz). Furthermore, both unevenness variables decrease with V. Probability plot of Rz is depicted for trialing statistical cogency of representations. Residuals deviations look like meticulously straight trajectory.
Keywords: RSM, Surface Unevenness, CNC Turning, ASTM 316 Steel, Workout Variables, Workpiece.
Scope of the Article: Frequency Selective Surface.