Multilayer Structure of a New Portable, Low-Cost and Reversible Arithmetic and Logic Unit using High-Speed and Low-Power “QCA” Technology with Good-Scalability
Rupsa Roy1, Swarup Sarkar2, Sudipta Das3
1Rupsa Roy, Department of ETCE, Jakir Hossain Institute of Polytechnic, Murshidabad, W.B, India.
2Swarup Sarkar,Department of ECE, Sikkim Manipal University, Sikkim, India.
3Sudipta Das, Department of ECE, IMPS College of Engineering and Technology, Malda, W.B, India.

Manuscript received on November 11, 2019. | Revised Manuscript received on November 20 2019. | Manuscript published on 30 November, 2019. | PP: 10568-10575 | Volume-8 Issue-4, November 2019. | Retrieval Number: D8029118419/2019©BEIESP | DOI: 10.35940/ijrte.D8029.118419

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: All nano-technologies including “QCA” (Quantum-dot Cellular Automata) is widely used in today‟s world to reduce the power dissipation, area and delay. “QCA” is a magnify technology with huge advantages such as: high-speed, high-density, faster-switching and higher clock-frequency which is rapidly used for Integrated-Circuit (“IC”) design. Quantum-dot Cellular Automata is an useful and appropriate alternative of the “CMOS-technology” because of its various advantages such as: it‟s high-frequency, less power leakage and less required area. An “ALU” (arithmetic and logic unit) is applying for all types of arithmetic-logical performances and it widely used in digital circuits for all types of arithmetic and logical operations. The reversible-Logic an authentic solution in low-power and low-cost technology. This paper presents a latest 3-D or multilayer structure of ALU using reversible-computing and also non-reversible logic which gives a comparative outcome with low supply-power and delay. The complexity of the formation and the engrossed size of this model is low. „AND-Gate‟, „OR-Gate‟ ,„XOR-Gate‟ and the reversible „TSG-Gate‟ and also the non-reversible model of “Full-Adder” are used to design the suggested model of this paper through the “QCA Designer” software (for simulation).This design reduce the size of the model up to 0.11 μm2 with three layers which is also compared to the formation in the “Xilinx” software.
Keywords: Arithmetic-logic Performance, High-Speed, Multilayer or 3-D Structure, „TSG-Gate‟, “QCA Designer”, “Xilinx”.
Scope of the Article: Measurement & Performance Analysis.