DM3730 Processor Hardware Debugging on Linux Platform
K.Yadaiah1, Vijayalaxmi Biradar2
1K.Yadaiah, Associate Professor, Department of ECE, Vignan Insitute of Technology and Science.
2Vijayalaxmi Biradar, Associate Professor, Department of ECE, Vignan Institute of Technology and Science. 

Manuscript received on November 15, 2019. | Revised Manuscript received on November 23, 2019. | Manuscript published on November 30, 2019. | PP: 938-941 | Volume-8 Issue-4, November 2019. | Retrieval Number: D7558118419/2019©BEIESP | DOI: 10.35940/ijrte.D7558.118419

Open Access | Ethics and Policies | Cite  | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (

Abstract: Texas Instruments fabricated a single chip DM3730 processor with 45nm technology with improved performance. Less power consumption and imrpoved Graphics features are the key parametes of ARM architecture. DM3730 has 1GHz processor with 0.4mm pitch Package on Package. Design of effective system is facilitated by properly debugging the hardware and software. The system for detection of driver fatigue for its implementation requires coming in contact with the camera to capture driver image, speaker for warning messages, GSM module to disseminate SMS, mouse, internet, keyboarb, etc. for installing different packages. In this paper, DM3730 Processor is tested for different peripherals on Linux Platform.This paper is a part of research work on the project “Development of Non-Intrusive Driver Fatigue Detection &Alarming System to evade on road accidents” sanctioned under Early Career Research Award sponsored by Science & Engineering Research Board, Govt. of India, New Delhi at Vignan Institute of Technology & Science, Vignan Hills, Hyderabad.
Keywords: DM3730, GS, Camera, Image.
Scope of the Article: Signal and Image Processing.