Rheological Behavior of Ordinary Concrete, SCC with and without Glass and Steel Fibers
Swamy H.C.M1, G. Prince Arul Raj2

1Swamy H C M, Part time Research Scholar and Associate Professor at Alva Institute of Engineering, Moodabidri.
2Prince Arul Raj G. Dean and Professor Karunya Institute of Science and Technology, Coimbatore( Tamil Nadu) India.

Manuscript received on August 01, 2020. | Revised Manuscript received on August 05, 2020. | Manuscript published on September 30, 2020. | PP: 411-417 | Volume-9 Issue-3, September 2020. | Retrieval Number: 100.1/ijrte.C4489099320 | DOI: 10.35940/ijrte.C4489.099320
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: Rheology indicates its flowability and deformation. These two parameters indicate directly workability. It measures the normal and shearing forces in fresh concrete state. In this article the flowability and its measurement are discussed for ordinary and SCC with Glass and steel fibers are demonstrated. The strength parameter for a particular concrete mix is demonstrated with sampling and acceptance criteria. The new draft code on design of concrete mix (IS-10262) verified by compliance with specifications. The different parameters like percentage of Glass and Steel fibers, different percentages of silica fume, and different dosages of superplasticizer are tested and reported. A comparative analysis for, with and without glass fibers on ordinary and SCC predicted. 
Keywords: Rheology of ordinary concrete, Flowability of SCC, Workability of SCC with Glass fibers, Rheology of SCC with steel fibers, Sampling and acceptance criteria for SCC, Compliance with specification for SCC.