Thermal Performance of Composite Roof Structures with Insulating Layers in Non-Conditioned Buildings for Hot-Dry Climate
Mohan Rawat1, R N Singh2

1Mr. Mohan Rawat, Research Scholar, School of Energy and Environmental Studies, Devi Ahilya Vishwavidyalaya, Indore, Madhya Pradesh, India.
2Dr. R. N. Singh, Head and Professor, School of Energy and Environmental Studies, Devi Ahilya Vishwavidyalaya, Indore, Madhya Pradesh, India.

Manuscript received on August 01, 2020. | Revised Manuscript received on August 05, 2020. | Manuscript published on September 30, 2020. | PP: 122-127 | Volume-9 Issue-3, September 2020. | Retrieval Number: 100.1/ijrte.C4272099320 | DOI: 10.35940/ijrte.C4272.099320
Open Access | Ethics and Policies | Cite | Mendeley
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The roof configurations with an insulating layer and their impact on hourly floating temperature analyzed in a hot-dry climate context. A predefined computer program using a modified Fourier admittance method utilized as the primary research. The thermal performance of ten composite roof structures evaluated to obtain optimal roof structure for hot-dry climate, Jodhpur. Nine composite roof structures with an insulation layer and one without insulation layer as the base case were analyzed for the summer months (April-September). The utilization of roof thermal insulation showed a significant influence on the overall thermal performance of roofs. It also revealed that minimum temperature variation found about 8.8 0C for the composite roof structure of Reinforced Cement Concrete (RCC) with foam concrete insulation (i.e., RF-5) with thicknesses 150 mm and 140 mm respectively. The analysis assessed that composite roof structure with an insulating layer is a useful technique to reduced indoor temperature in non-conditioned buildings of hot-dry climate.
Keywords: Fourier admittance method, Heat Gain, Hot-dry climate, Thermal comfort, Simulation.