Modelling and Fabrication of Portable E-kit fixtures for Bicycles
Thejas Jain K1, R Kumar2, C Siddaraju3
1THEJAS JAIN K Department of Computer Integrated Manufacturing from Ramaiah Institutre of Technology, Bangalore, Karanataka.
2Dr R. Kumar, Assistant Professor, Department of Mechanical Engineering Ramaiah Institutre of Technology, Bangalore, Karanataka
3Dr. Siddaraju C. Assistant Professor, Department of Mechanical Engineering Ramaiah Institutre of Technology, Bangalore, Karanataka
Manuscript received on 14 March 2019 | Revised Manuscript received on 18 March 2019 | Manuscript published on 30 July 2019 | PP: 5866-5868 | Volume-8 Issue-2, July 2019 | Retrieval Number: B3778078219/2019©BEIESP | DOI: 10.35940/ijrte.B3778.078219
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: The percentage of vehicles on the road increasing day by day, which tends to increase the consumption of fuel and emission of this product hazardous to environment. The usage of fossil fuels should be reduced and also it should be available to future generation also. The emission of fuel products is hazardous to the environment and also to the human being. Considering this into account reduction of usage of fossil fuel is main concept i.e. Electric Bicycle. So the available bicycle would run on alternative source which reduces the human effort. For the bicycle to run a e-kit fixture is designed and manufactured in such a way that it is suitable for different types of bicycles. So that the fixing and removal of kit takes place in few minutes and it can be fitted other cycles. After assembling the e-kit to the bicycles it should run without human effort whenever needed.
Index Terms: Electric Bicycle, E-kit Fixture, Fossil Fuels.
Scope of the Article: Computer Graphics, Simulation, and Modelling