Influence of the Valve – Pull-down Equipment on the Area of High Pressure Peaks in Long Pipelines
Fedor V. Rekach1, Svetlana L. Shambina2, Evgeny K. Sinichenko3, Yuri V. Belousov4

1Fedor V. Rekach, Peoples’ Friendship University of Russia RUDN University, 6 Miklukho-Maklaya Street, Moscow, Russian Federation.
2Svetlana L. Shambina, Peoples’ Friendship University of Russia RUDN University, 6 Miklukho-Maklaya Street, Moscow, Russian Federation.
3Evgeny K. Sinichenko, Peoples’ Friendship University of Russia RUDN University, 6 Miklukho-Maklaya Street, Moscow, Russian Federation.
4Yuri V. Belousov, Bauman Moscow State Technical University, 5, Baumanskaya 2-ya Street, Moscow, Russian Federation.
Manuscript received on 19 October 2019 | Revised Manuscript received on 25 October 2019 | Manuscript Published on 02 November 2019 | PP: 3482-3485 | Volume-8 Issue-2S11 September 2019 | Retrieval Number: B15870982S1119/2019©BEIESP | DOI: 10.35940/ijrte.B1587.0982S1119
Open Access | Editorial and Publishing Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)

Abstract: The pipeline system is usually destroyed by the high internal pressure in the tubes due to development of water hammers. Also the possibility of continuous pressure oscillations causing vibration of external piping is dangerous, because it leads to loosening and destruction of the supports. One of the effective methods to protect a long pipeline is the possibility of removing liquid from the pipeline. The paper deals with the calculation of similar valve-pull-down unit by the numerical method of characteristics.
Keywords: Valve-Pull-Down Unit; Water Hammer; Pressure Fluctuations.
Scope of the Article: Social Sciences