Demonstrating and Analysis of Turbine Blade
Harshit Sharma1, Hrishikesh Mishra2, Madhav Gupta3, Neelam Baghel4
1Harshit Sharma, Department of Mechanical Engineering, ITM Group of Institutions, Gwalior, India.
2Hrishikesh Mishra, Department of Mechanical Engineering, ITM Group of Institutions, Gwalior, India.
3Madhav Gupta, Department of Mechanical Engineering, ITM Group of Institutions, Gwalior, India.
4Neelam Baghel, Asst. Proff. Department of Mechanical Engineering, Itm Group of Institutions, Gwalior, India.
Manuscript received on 09 April 2019 | Revised Manuscript received on 15 May 2019 | Manuscript published on 30 May 2019 | PP: 1448-1451 | Volume-8 Issue-1, May 2019 | Retrieval Number: A3317058119/19©BEIESP
Open Access | Ethics and Policies | Cite | Mendeley | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: A steam turbine is a device that extracts thermal energy from pressurized steam and uses it to do mechanical work on a rotating output shaft. The steam turbine gives the better thermodynamic efficiency by using multiple stages in the expansion of steam. The stages are characterized by the way of energy extraction from them is considered as impulse or reaction turbines. In this work the parameters of steam turbine blade varied and analysis is done for strength, life and heat transfer rates. The varied parameters are the ratio of X-axis distance of blade profile by chord length and ratio of maximum height of blade profile in Y-direction to the chord length. The 3D modeling is done by using SOLIDWORKS software. The ANSYS software is used for static, thermal analysis finally concluded the suitable design and material (titanium alloy, manganese bronze, tungsten -1) for steam turbine blade.
Keyword: Steam Turbine, Thermal Energy, Impulse Turbine, Reaction Turbine, Static Analysis, Thermal Analysi.
Scope of the Article: Thermal Engineering